No products
WRC Volume 60 No. 01-02 2005Progress Reports Volume 60 No. 01-02 2005Report / Survey by Welding Research Council, 2005Welding Research Council, Inc.
WRC 500Stress or Strain Criteria for Combined Static and Dynamic LoadingBulletin / Circular by Welding Research Council, 2005E. J. Hampton, J. L. Bitner
WRC 504Interpretative Report Hardfacing and WearBulletin / Circular by Welding Research Council, 2005H. S. Avery, P. A. Kamer
WRC 499Literature Survey of Half-Bead, Temper-Bead, Controlled Deposition Techniques for Improvement of Fabrication and Service Performance of Cr-Mo SteelsBulletin / Circular by Welding Research Council, 2005C. D. Lundin, Y. Wang, G. Batten
WRC 507Long Term Pressurized Graphite Gasketed Joint Tests: Part 1, Part 2, & Part 3Bulletin / Circular by Welding Research Council, 2005L. Marchand, M. Derenne, O. Sakr, H. A. Bouzid
WRC 488Damage Mechanisms Affecting Fixed Equipment in the Pulp and Paper IndustryBulletin / Circular by Welding Research Council, 2004J. D. Dobis, D. C. Bennett
WRC 491Interpretive Report on Dynamic Analysis and Testing of Pressurized Components and Systems - Sixth EditionBulletin / Circular by Welding Research Council, 2004G. Antaki, J. Bitner, K. Dwivedy, H. Hwang. R. Scavuzzo
WRC 494Fracture-Safe and Fatigue Design Criteria for Detonation-Induced Pressure Loading in Containment VesselsBulletin / Circular by Welding Research Council, 2004E. A. Rodriguez, T. A. Duffey
WRC 492Piping System SIFs and Flexibility Analysis Criteria: Part 1 & Part 2Bulletin / Circular by Welding Research Council, 2004R. J. Scavuzzo; E. C. Rodabaugh
WRC 496Effect of Flange Rotation and Gasket Width on Leakage Behavior of Bolted Flanged Joints: Part 1, Part 2, & Part 3Bulletin / Circular by Welding Research Council, 2004A. Bouzid, M. Derenne, M. El-Rich
WRC Volume 59 No. 09-10 2004Progress Reports Volume 59 No. 09-10 2004Report / Survey by Welding Research Council, 2004Welding Research Council, Inc.
WRC Volume 59 No. 07-08 2004Progress Reports Volume 59 No. 07-08 2004Report / Survey by Welding Research Council, 2004Welding Research Council, Inc.