-
1 x EIA-356:1968$26.11 -
1 x IES APPSEM...$38.70 -
1 x ASHRAE...$0.00 -
1 x IES LM-51-13$8.60 - 1 x UNE-CEN/TS...$45.60
- 1 x SAE AMS4081K$32.68
-
1 x IES...$32.25 -
1 x AS ISO...$33.69 -
1 x AS ISO...$24.86 -
1 x AS...$48.28 - 1 x UNE-IEC/TS...$35.40
- 1 x SAE AMS4342G$28.38
- 1 x GMW15420$14.19
- 1 x EIA-369:1969$24.92
- 1 x UNE...$42.00
-
1 x IES LM-84-14$8.60 - 1 x UNE...$32.40
-
1 x AAMI...$232.20
No products
Viewed products
-
SAE AIR 1408B:2019-05-24
SAE AIR 1408B:2019-05-24 Aerospace...
-
![AS K152.14-1967 [ Superseded ]](https://www.docuarea.org/111498-small_default/as-k15214-1967-superseded-13.jpg)
AS K152.14-1967...
AS K152.14-1967...
FORD There are 11079 products.
FORD WSS M4D644-A3:2005
FORD WSS M4D644-A3:2005 POLYPROPYLENE (PP) HOMOPOLYMER, HEAT STABILIZED, 40% MINERAL FILLED, CONTROLLED RHEOLOGY, 25% MINIMUM RECYCLED CONTENT MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
$13.55 $31.50 -57%In StockFORD WSK M4D635-A1:2005
FORD WSK M4D635-A1:2005 ACETAL (POM) COPOLYMER, MELT FLOW RATE 0.7 - 4 ***TO BE USED WITH FORD WSS-M99P1111-A***
$13.55 $31.50 -57%In StockFORD FLTM AN 101-01:2005
FORD FLTM AN 101-01:2005 RESISTANCE OF TEXTILES TO BLEEDING, PERSPIRATION AND WATER SPOTTING
$13.85 $32.20 -57%In StockFORD WA 950:2005
FORD WA 950:2005 Material Requirements and Mechanical Properties of Bolts, Studs and Bolt & Washer Assemblies
$13.55 $31.50 -57%In StockFORD WSS M2D507-A6:2004
FORD WSS M2D507-A6:2004 THERMOPLASTIC ELASTOMER (TES) STYRENE BLOCK COPOLYMER 25 DUROMETER A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***
$13.55 $31.50 -57%In StockFORD WSS-M3H105-A5:2004
FORD WSS-M3H105-A5:2004 CARPET, POLO PATTERN, 100% RECYCLED POLYESTER FIBER, FLAT NEEDLED, LATEX BACKCOATED, ACRYLIC LATEX FOAM BACKING ***TO BE USED WITH FORD WSS-M99P1111-A***
$13.55 $31.50 -57%In StockFORD WSK M2D419-A:2004
FORD WSK M2D419-A:2004 CELLULAR ELASTOMER, GASKET ***TO BE USED WITH FORD WSS-M99P1111-A***
$13.55 $31.50 -57%In StockFORD WSD M2D378-A4:2004
FORD WSD M2D378-A4:2004 THERMOPLASTIC ELASTOMER (TEO) POLYOLEFIN, EPDM RUBBER MODIFIED MODERATE HEAT RESISTANT 48 DUROMETER A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***
$13.55 $31.50 -57%In StockFORD WSP-M2D377-A:2004
FORD WSP-M2D377-A:2004 ETHYLENE/ACRYLIC (AEM) RUBBER, LOW COMPRESSION SET - GROMMET ***TO BE USED WITH FORD WSS-M99P1111-A***
$13.55 $31.50 -57%In StockFORD WSA M21P26-A:2004
FORD WSA M21P26-A:2004 CORROSION PROTECTIVE SECONDARY COATING, ALUMINUM FILLED, ORGANIC RESIN BONDED ***TO BE USED WITH FORD WSS-M99P1111-A***
$13.85 $32.20 -57%In StockFORD WSD M3P35-A1:2004
FORD WSD M3P35-A1:2004 PHOSPHATE COATING, ZINC IRON, AS COATED ***TO BE USED WITH FORD WSS-M99P1111-A***
$13.55 $31.50 -57%In StockFORD WSK M2D417-A:2003
FORD WSK M2D417-A:2003 Polyurethane (PUR) FOAM, Slab Stock
$13.55 $31.50 -57%In Stock
