Full Description

This document specifies requirements for two types of reinforced hoses and hose assemblies of nominal size from 3,2 to 25, dependent on relation of minimum burst pressure to maximum working pressure. Each type is divided into classes dependent on maximum working pressure.

They are suitable for use with:

oil-based hydraulic fluids HH, HL, HM, HR and HV as defined in ISO6743-4 at temperatures ranging from 40C to +100C;

water-based fluids HFC, HFAE, HFAS and HFB as defined in ISO6743-4 at temperatures ranging from 0C to +70C;

water at temperatures ranging from 0C to +70C.

Such hoses and hose assemblies are intended to be used for:

water jetting and water blasting applications;

hydraulic applications.

This document does not include requirements for end fittings. It is limited to the performance of hoses and hose assemblies.

NOTE1 It is the responsibility of the user, in consultation with the hose manufacturer, to establish the compatibility of the hose with the fluid to be used.

NOTE2 For hydraulic jacks with manually driven pumps, hoses and hose assemblies per ISO16301 can be used.