No products

BS PD CEN ISO/TR 20659‑2:2024 Rheological test methods. Fundamentals...

BS PD ISO/IEC TS 18013‑7:2024 Historical[ Withdrawn ] Personal...

BS PD ISO/TS 20790:2024 Oil and gas industries including lower carbon...

BS PD CEN ISO/TR 8124‑8:2024 Safety of toys - Age determination. First...

BS PD ISO/IEC TS 8236-2:2025 Information technology. Provisioning,...

BS PD CEN/TR 14380:2024 Lighting applications. Tunnel lighting standard...


BS PD CEN/TR 16389:2025 Automotive fuels. Paraffinic diesel fuel and...
SAE AMS 7338A:2019-07-18 Rubber: Butyl (IIR Abbreviation), Phosphate Ester Resistant, 65 to 75 Hardness, for Seals in Hydraulic Systems, etc. (Stabilized: Jul 2019)
SAE AMS 7601:2019-07-18 Rubber: Butyl (IIR), Low Compression Set and Low Moisture/Gas Permeability, 65 to 75 Type A Hardness, for Seals in Desiccated or Other Systems Requiring Resistance to Gas and/or Water Vapor Permeation
SAE J 2962/1:2019-07-18 Communication Transceivers Qualification Requirements - LIN
SAE J 2962/2:2019-07-18 Communication Transceivers Qualification Requirements - CAN
SAE J 3174:2019-07-18 Recommended Practice for an Engineering Analysis for A/C Efficiency Credits
SAE AMS 4063F:2019-07-18 Aluminum Alloy, Clad One Side, Sheet, 1.25Mn - 0.12Cu (No. 11-0 Brazing Sheet), Annealed
SAE AMS 5607G:2019-07-18 Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate, 73Ni - 7.0Cr - 16.5Mo, Solution Heat Treated
SAE AMS 2440C:2019-07-18 Inspection of Ground, Chromium, Plated Steel Parts (Stabilized: Jul 2019)
SAE J 2985:2019-07-17 Definition and Measurement of Transfer Case Speed-Dependent Parasitic Loss
SAE AMS 2452:2019-07-15 Superfinishing of HVOF Applied Tungsten Carbide Coatings
SAE J 3112:2019-07-15 A/C Compressor Oil Separator Effectiveness Test Standard
SAE J 2836/1:2019-07-15 Use Cases for Communication Between Plug-in Vehicles and the Utility Grid