No products
SAE AMS4777KNickel Alloy, Brazing Filler Metal 82Ni - 4.5Si - 7.0Cr - 3.1B - 3.0Fe 1780 °F (971 °C) Solidus to 1830 °F (999 °C) Liquidus Rangestandard by SAE International, 10/05/2023
SAE J1939DA_202310J1939 Digital Annexstandard by SAE International, 10/05/2023
SAE J1307_202310Excavator and Backhoe Hand Signalsstandard by SAE International, 10/05/2023
SAE ARP6912Substantiation of Power Available and Inlet Distortion Compliance for Rotorcraft Engine Inlet Barrier Filter Installationsstandard by SAE International, 10/05/2023
SAE AMS5637KSteel, Corrosion-Resistant, Bars and Wire 18Cr - 9.0Ni (302) Solution Heat Treated, Cold Drawn and Stress Relieved 125 ksi (862 MPa) Tensile Strengthstandard by SAE International, 10/05/2023
SAE J343_202310Test and Test Procedures for SAE 100R Series Hydraulic Hose and Hose Assembliesstandard by SAE International, 10/05/2023
SAE J1400_202310Laboratory Measurement of the Airborne Sound Barrier Performance of Flat Materials and Assembliesstandard by SAE International, 10/05/2023
SAE ARP8462Evaluation of Fouling Propensity of Aviation Lubricants Using the Mixed-Phase Flow Technique (High-Temperature Deposition Test)standard by SAE International, 10/05/2023
SAE AMS3216JElastomer: Fluorocarbon (FKM) Rubber High-Temperature - Fluid Resistant Low Compression Set / 70 to 80 Type A Hardness For Products in Fuel Systems and Specific Engine Oil Systemsstandard by SAE International, 10/05/2023
SAE ARP6152Aircraft Tires Service Overload Capabilitystandard by SAE International, 10/03/2023
SAE AS81582CConnectors, Electrical, Bayonet Coupling, Environment Resisting, Umbilical, General Specification Forstandard by SAE International, 10/03/2023
SAE AS22520/40CRIMPING TOOLS, TERMINAL, HAND, WIRE TERMINATION; TYPE II T-HEAD FOR TERMINAL LUGS AND SPLICES SIZE 22-14standard by SAE International, 10/03/2023