No products
Viewed products
IEC 60335-2-12 Ed. 5.0 b:2002...
SAE AMS3023C...
SAE AMS2431/2GPeening Media (ASH) Cast Steel Shot, High Hardness (55 to 62 HRC)standard by SAE International, 11/22/2022
SAE AS5467General Requirements for Hydraulic Fuse - Flow Ratestandard by SAE International, 11/18/2022
SAE AMS5694KSteel, Corrosion- and Heat-Resistant, Welding Wire 27Cr - 21.5Nistandard by SAE International, 11/18/2022
SAE AMS5808DSteel, Corrosion- and Heat-Resistant, Welding Wire 19Cr - 13Ni - 2.5Mo High Ferrite Grade, Trace Element Controlledstandard by SAE International, 11/18/2022
SAE J287_202211Driver Hand Control Reachstandard by SAE International, 11/18/2022
SAE AIR902ADetermination of Distance from Ground Observer to Aircraft for Acoustic Testsstandard by SAE International, 11/18/2022
SAE AS5316Storage of Elastomer Seals and Seal Assemblies Which Include an Elastomer Element Prior to Hardware Assemblystandard by SAE International, 11/18/2022
SAE AMS5355JSteel, Corrosion-Resistant, Investment Castings 16Cr - 4.1Ni - 0.28Cb - 3.2Cu Homogenization and Solution Heat Treated or Homogenization, Solution, and Precipitation Heat Treatedstandard by SAE International, 11/18/2022
SAE AMS5747ENickel Alloy, Corrosion- and Heat-Resistant, Bars, Forgings, and Rings 72Ni - 15.5Cr - 0.95Cb(Nb) - 2.5Ti - 0.70Al - 7.0Fe 1800 °F (982 °C) Solution Heat Treated, Precipitation Hardenablestandard by SAE International, 11/18/2022
SAE AIR6297Method to Calculate Behind Start of Takeoff Roll Noise Level Adjustmentsstandard by SAE International, 11/18/2022
SAE AMS5356DSteel, Corrosion-Resistant, Investment Castings 15Cr - 4.6Ni - 0.22Cb - 2.8Cu Solution and Precipitation Heat Treated (H1100) 130 ksi (896 MPa) Tensile Strengthstandard by SAE International, 11/18/2022
SAE AMS5714EAlloy Bars, Forgings, and Rings, Corrosion- and Heat-Resistant 73Ni - 15.5Cr - 2.5Ti - 0.70Al - 7.0Fe Precipitation Hardenablestandard by SAE International, 11/18/2022