No products
SAE AMS5588HNickel Alloy, Corrosion- and Heat-Resistant, Welded Tubing 47.5Ni - 22Cr - 1.5Co - 9.0Mo - 0.60W - 18.5Fe Solution Heat Treatedstandard by SAE International, 06/20/2022
SAE AMS3281GSealing Compound, Polysulfide (T) Synthetic Rubber for Integral Fuel Tank and Fuel Cell Cavities Low Density for Intermittent Use to 360 °F (182 °C)standard by SAE International, 06/13/2022
SAE AS22759/60WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED CROSSLINEKD MODIFIED ETFE, FLUORIDE CONTROLLED, MEDIUM WEIGHT, SILVER-COATED HIGH STRENGTH COPPER ALLOY, 200 °C, 600 VOLT, ROHSstandard by SAE International, 06/13/2022
SAE AMS5823FSteel, Corrosion- and Heat-Resistant, Welding Wire 11.8Cr - 2.8Ni - 1.6Co - 1.8Mo - 0.32V (Stabilized: Jun 2022)standard by SAE International, 06/02/2022
SAE AMS4213BAluminum Alloy Plate (2027-T351) 4.4Cu - 1.2Mg - 0.8Mn - 0.10Zr Solution Heat Treated, Cold Worked and Naturally Agedstandard by SAE International, 06/02/2022
SAE AMS4327BAluminum Alloy, Plate (2098-O) 3.5Cu - 1.1Li - 0.50Mg - 0.40Ag - 0.11Zr Annealedstandard by SAE International, 06/02/2022
SAE AMS5746GAlloy, Corrosion- and Heat-Resistant, Bars and Forgings 15Cr - 45Ni - 4.1Mo - 4.1W - 3.0Ti - 1.0Al - 31Fe (D979) Consumable Electrode Vacuum Melted Solution and Precipitation Heat Treated (Stabilized: Jun 2022)standard by SAE International, 06/02/2022
SAE AS622DHOSE ASSEMBLY, 3000 PSI, PTFE, FLARELESS, STRAIGHT TO 45°, HEAVYWEIGHTstandard by SAE International, 05/26/2022
SAE AMS3328DElastomer: Fluorosilicone Rubber (FVMQ) Fuel and Oil Resistant 35 - 45 Type “A” Durometer Hardness for Products Used in Engine Oil Systems/Fuel Systemsstandard by SAE International, 05/24/2022
SAE J131_202205Motorcycle Turn Signal Lampsstandard by SAE International, 05/24/2022
SAE AS4353BHOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, CRES REINFORCED, 400 °F, 3000 PSI, HEAVYWEIGHT, BEAM SEAL, STRAIGHT TO 45°standard by SAE International, 05/24/2022
SAE AIR4783AGlossary of Terms - Aircraft Ground Refueling and Defuelingstandard by SAE International, 05/24/2022